Furuno 2837swd Marine RADAR User Manual


 
viii
1) Connect the EPFS which is approved in accordance with the requirements of the IMO in
resolution MSC.112(73) is used.
2) Connect the SDME which is approved in accordance with the requirements of the IMO
in resolution MSC.96(72) is used.
3) Use the gyrocompass having an update rate that is adequate for the ship’s rate of turn.
About the category sticker
This radar meets the requirements in IEC62388 (Marine navigation and radio
communication equipment and systems – Shipborne radar – Performance requirements,
method of testing and required test results).
Check the appropriate box on the sticker which is pre-attached on the processor unit.,
according to your radar’s specification. Refer to the table shown below to confirm your
category.
Category Radar type Antenna rotation speed
CAT 1C
FCR-2817, FCR-2817-D, FCR-2827,
FCR-2827-D, FCR-2837S, FCR-2837S-D,
FCR-2827W, FCR-2827W-D, FCR-2837SW,
FCR-2837SW-D
Normal speed
CAT 1HC
FCR-2817, FCR-2817-D, FCR-2827,
FCR-2827-D, FCR-2837S, FCR-2837S-D
HSC
CAT 2C
FCR-2117/BB, FCR-2117-D, FCR-2127/BB,
FCR-2127-D, FCR-2137S/BB, FCR-2137S-D
Normal speed
CAT 2HC
FCR-2117/BB, FCR-2117-D, FCR-2127/BB,
FCR-2127-D, FCR-2137S/BB, FCR-2137S-D
HSC
Sticker for Category