Filter
Top Products
3. SETTING AND ADJUSTMENT
3-22
3.10 Parameters
Open the Installation Parameter dialog box as described on page 3-7.
Activate changes now
Restart needed to activate
There are several buttons in this dialog box, and these are described below:
Set parameters default
This restores Installation parameters which are saved as a backup copy by service
personnel. Use this function if you are not sure about Installation parameters values.
Activate changes now
This activates changes and closes the Installation parameters dialog box.
Restart needed to activate
This closes Installation parameters dialog box and activates changes after restarting the
radar.
Sensor Channel Usage
This shows how the serial channels of LAN
adapters are configured and which analog
sensors are connected to the system through
the B adapter.