Filter
Top Products
3. SETTING AND ADJUSTMENT
3-6
[Main Menu]
MOB
Event
Record
Safety Message
Initial Settings
Alarms
TT+AIS
Sensors
Picture
Mark
Echo
Route Monitor
User Chart
Notes
Close
Chart Menu
Set Primary Display
AIS Own Ship Info
3.3 Setting Radar Number
If multiple radars are connected using the network hub, set as
follows.
1. Turn on a chart radar that you want to change its number.
2. Insert the “Authorizing key disk” to the chart processor unit.
Note that the installation parameters have limited access which
is controlled by the Authorization key disk supplied.
3. Press the MENU key on the control unit to show the Main
Menu.
4. Roll the wheel to choose “Initial Settings” to show INITIAL
SETTINGS dialog box.
INITIAL SETTINGS
Set values
Datum
Position
discrepancy limit
NM
WGS 84
0.00
5. Rotate the trackball to place the cursor on the
mark. The “Initial Settings” menu
appears.
[ Initial Settings ]
Function keys
Operation
Installation params
Radar Initialize
NAV params
Selftest
TT Test
Close
Priority Alert
Chart Alert params