Filter
Top Products
2. WIRING
2-22
Connection of Sub-display
A conventional remote display and/or FCR-2107 series radar can be connected to J617 and
J618 in the processor unit as a sub-display. However, the controls for GAIN and STC are
different depending on J617 and J618. Refer to the table below.
Port Conventional remote
display
FCR-2107 series radar
Overall gain Even if input video level is
adjusted to 4 Vp-p, the
gain is 8 db lower than
that on the master radar.
The gain is 8 dB lower than
that on the master radar.
GAIN control
The GAIN control
functions.
The GAIN control does not
function.
J617
(FULL-LOG)
STC control The STC control
functions.
The STC control does not
function.
Overall gain When input video level is
adjusted to 4 Vp-p, the
gain becomes the same
as that on the master
radar.
The gain is almost same as
that on the master radar.
GAIN control The GAIN control
functions.
The GAIN control does not
function.
J618
(SEMI-LOG)
STC control The STC control
functions, however this
control is added on the
signal adjusted by the
master radar. So this port
is not recommended to
use .
The STC control does not
function.