Filter
Top Products
2. WIRING
2-16
Wiring
1. Remove the cover from the RTR-082.
2. Pass the cables through the cable entrance, and then fix the armor with the cable
clamp.
3. Connect each wire to TB801, TB802, TB803, TB911 and TB912 referring to the
interconnection diagram.
TB803
TB801
TB911
TB912
TB802
Transceiver unit RTR-082, internal view
4. Connect the grounding wire (shipyard supply) between the grounding terminal (behind
the cable clamp) and grounding point.
Connecting the coaxial cable
Connect the coaxial cable to the transceiver unit as below.
1. Loosen eight bolts (M6x20) to remove the dust cover from the output WG adapter.
2. Fasten eight bolts (removed at step 1) to attach the flange to the transceiver unit.
3. Attach the coaxial cable to the converter of the flange.
Circulator
Adapter
Output WG adapter
M6x20 (8 pcs.)
Coaxial cable
Converter
M6x20 (8 pcs.)
Transceiver unit, internal view
Flange