Filter
Top Products
SAFETY INSTRUCTIONS
iii
CAUTION
CAUTION
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Turn off the power at the switchboard
before beginning the installation.
Fire or electrical shock can result if the
power is left on.
Do not install the equipment where it
may get wet from rain or water splash.
Water in the equipment can result in fire,
electrical shock or damage to the equipment.
Be sure that the power supply is
compatible with the voltage rating of the
equipment.
Connecting an incompatible power supply
can cause fire or damage the equipment.
The voltage rating appears on the inlet
of power.
Standard
compass
Steering
compass
0.30 m 0.30 m
FA-50
WARNING
Safety instructions for the installer
ELECTRICAL SHOCK HAZARD
Do not open the equipment unless
totally familiar with electrical circuits
and service manual.
Only qualified personnel should work
inside the equipment.
0.90 m 0.60 m
PR-240
0.30 m 0.30 m
GVA-100-T
0.30 m 0.30 m
DB-1
WARNING
Do not approach the antenna closer
than 0.4 m (MPE by FCC) when it is
transmitting.
The antenna emits radio waves which
can be harmful to the human body.
Radiation Hazard
RF power density
on antenna aperture
Description
required by
Distance
IEC 60945
IEC 60945
MPE by FCC
100 W/m
2
10 W/m
2
2 W/m
2
Nil
0.1 m
0.4 m
(MPE: Minimum Permissible Exposure)