Filter
Top Products
21. PARAMETERS
21-2
21.2 Instant Track Parameters
The instant track feature can create, in route monitoring, a simple route in the following
situations:
• Return to the monitored route when the vessel goes outside the channel limits.
• Temporarily deviate from the monitored route (avoid collision, etc.).
How to set instant track parameters
Set the parameters for the instant track ([MENU] → [General] → [Ship & Route Pa-
rameters] → [Instant Track] tab).
[Delay before Initiating First Turn]: Set the number of seconds (30 - 600 seconds) to
wait before initiating the first turn in the simple route.
[Turn Radius]: Set the turning radius (0.02 - 3.00 NM) to use between waypoints (four
waypoints) in the simple route.
[Channel Limit for Track Control]: Set the channel limit (10 - 1852 m) for the instant
track, automatically or manually. The [Auto] setting uses the channel limit set for the
monitored route.