Filter
Top Products
8
3. Initial Settings
3.1 NMEA Setting
NMEA port
1. Press the [MENU] key.
2. Press the software key labeled "CONFIGURATION".
3. Press the software key labeled "SETUP NMEA PORT1".
4. Select "FORMAT" by the arrow key.
5. Press the software key labeled "EDIT" to display the following
message.
s FORMAT NMEA 0183
VER 1.5
OUTPUT FORMAT
▲
NMEA0183 Ver1.5
' NMEA0183 Ver2.0
▼
DGPS 3D
SETUP
PORT1
ENTER
CANCEL
Figure 3-1 Output Format display
6. Select NMEA version by the arrow key. The selected item is indi-
cated by black button.
7. Press the software key labeled "ENTER".
8. Press the [PLOT] key to return to the plotter display.