Filter
Top Products
18
Connect to
J2 on GN-7707.
Connect to
J106 on
MAIN Board.
GN-7707
HEAT SINK
S.FL2-2LPO.7-D-WHT (121)
Cover of GR-7000A
Cable Assy.
PH6P-W-L240
Beacon Receiver Board
GR-7000A
J2
Pan-head Screw B
M3X10, 4 pcs.
Notch
Connect to J107
on MAIN Board
Connect to
J8 on ANLG
Board.
Figure 4-6 Installation of DGPS beacon receiver
12. Connect the cable assy. S.FL2-2LP0.7-D-WHT (121) of J3 to J2
of the GN-7707.
13. Pass the mini pin coaxial cable of J1 on the GR-7000A through
the mini plug on the ANLG Board and connect it to J8 on the
ANLG Board.
14. Mount the ANLG board on the heat sink.
GN-7707
GR-7000A
to J8 of
ANLG board
to J107 of
MAIN board
to J106 of
MAIN board
Connect PH6P-W-L240 between J2 of
GR-7000A and J107 of MAIN board.
Connect mini pin coaxial cable
between J1 of GR-7000A and J8 of
ANLG board.
Connect cable assy.
J3 of GR-7000A to
J2 of GN-7707.
J3
J1
J1
J2
J2
Connect cable assy.
J1 of GN-7707 to J106
of MAIN board.
HEAT SINK
Clamp
GR-7000A
GN-7707
Mini pin coxial cable
Cable tie
Figure 4-7 Wiring the Cable assembly