Filter
Top Products
47
9 INSTALLATION OF VIDEO
PLOTTER KIT
9.1 Tabletop/Console Type
Necessary parts
RP-250-T-2E-N (Code No. 000-080-196), For NAVIONICS specification
RP-250-T-2E-C (Code No. 000-080-197), For C-MAP specification
Name Type Qty Code No. Remarks
IF board
Cable assy.
M-card base
M-card lid
M-card case
M-Card Assy. — 1 —
M-card case
cover
14P0371A 1 008-528-020 For NAVIONICS
RP Board
14P0371B 1 008-528-030 For C-MAP
Pan Head Screw B M4 x 8 C2700W 4 000-881-445
Pan Head Screw B M3 x 8 C2700W 2 000-881-404 Not used
Pan Head Screw A M2.6 x 5 C2700W 2 000-800-973 Not used
Pan Head Screw A M3 x 8 C2700W 1 000-881-104 Not used
Toothed Washer M4 C5191W 1 000-864-506
Toothed Washer M3 C5191W 1 000-864-504 Not used
NH Connector Assy. 03-2059 (5P) 1 008-528-260
Keytop Label 03-144-1531 1 100-299-820
Program Floppy Disk 03-591-84 1 008-528-130 Note 1
Operator’s Manual OME-30470-X 1 000-809-332
Note 1: Check radar program no. (03591840XX). If the program number of the
program in the floppy disk is higher, update the program. If it is the
same, it is not necessary to update the program.
Note 2: Windows PC and optional PC connection cable
(Type: JEC9S-XH4P-L1500, Code no.: 000-145-362) also required.