Filter
Top Products
Fishnder 160C Owner’s Manual
InstAllIng the fIshfInder 160c > unIt InstAllAtIon
Unit Installation
Choose a location that provides optimal viewing and allows easy
access to the unit’s keypad. Select a mounting surface strong enough
to support the weight of the unit and protect it from excessive
vibration or shock. DO NOT mount the bracket in a location where
the unit is exposed to extreme temperature conditions. When
installing the mounting bracket, be sure to allow room for the
connection and routing of the power cable.
Tool List (not included)
—drill, screwdriver (Phillips or standard),
three #8 pan-head machine bolts with matching nuts and washers,
and a 5/32" drill bit, OR three #8 pan head self-tapping screws, and
a 1/16" drill bit.
To mount the bracket assembly:
1. Using the swivel base as a template, mark the location of the
three mounting holes.
2. If securing the base with machine bolts, drill three 5/32" holes
at the locations you marked. If securing the base using self-
tapping screws, drill 1/16" starter holes at the locations you
marked. Generally, starter holes should be no deeper than
half the screw length.
3. Secure the swivel base with three bolts or screws. DO NOT
OVERTIGHTEN.
4. Attach the swivel bracket and secure it with the short knob.
Mounting Holes
Swivel Base
Swivel Bracket and Base
Short Knob