Garmin 190-01166-02 Marine Instruments User Manual


  Open as PDF
of 48
 
38 GHP 10 Marine Autopilot System Installation Instructions
Advanced Conguration Power-on Procedure
Advanced conguration options are not available on the GHC 10 under normal conditions. To access the advanced conguration
settings of the GHP 10, use the advanced conguration power-on procedure.
To access the wizards and advanced conguration options:
1. With the power off, press both the center and the right soft keys on the GHC 10.
2. While pressing the center and the right soft keys, power the GHC 10 on.
3. Press all 3 buttons until the heading screen appears. Release the buttons.
To make sure the wizards and advanced conguration options are available:
1. From the heading screen, select Menu > Setup.
2. If the option for Dealer Autopilot Conguration is available, you correctly performed the
advanced conguration power-on procedure.
Manually Running the Dockside and Sea Trial Wizards
The Dockside Wizard and the Sea Trial Wizard allow you to quickly dene all of the important conguration settings on the GHP 10.
If, after running the wizards, you do not feel as though the GHP 10 is working correctly, you can run the wizards again at any time. To
access the wizards, power the GHC 10 on using the advanced conguration power-on procedure.
To manually run the Dockside Wizard:
1. From the Heading screen, select Menu > Setup > Dealer Autopilot Conguration > Wizards > Dockside Wizard.
2. Perform the steps as prompted. For more information, see page 35.
To manually run the Sea Trial Wizard:
1. From the Heading screen, select Menu > Setup > Dealer Autopilot Conguration > Wizards > Sea Trial Wizard.
2. Perform the steps as prompted. For more information, see page 35.
Changing Advanced Conguration Settings
You can run the Autotune automated conguration process, calibrate the compass, and dene north on the GHP 10 through the
GHC 10 without running the wizards. Additionally, without running the wizards, you can individually dene each conguration
setting. To access the automated conguration settings and the advanced conguration settings, power the GHC 10 on using the
advanced conguration power-on procedure
To manually run the automated conguration settings:
1. From the Heading screen, select Menu > Setup > Dealer Autopilot Conguration > Automated Setup.
2. Select Autotune, Calibrate Compass, or Set North.
3. Perform the steps as prompted. For more information on each automated conguration setting, see page 35.
To manually dene individual conguration settings:
1. From the Heading screen, select Menu > Setup > Dealer Autopilot Conguration.
2. Select the appropriate category of setting you want to congure.
3. Select the setting you want to congure. Refer to the description of each setting on
page 39.
Advanced Conguration
Power-on Procedure
Hold these
soft keys
and power the
GHC 10 on
Advanced Conguration
Power-on Procedure
Hold these
soft keys
and power the
GHC 10 on
 previous next