Filter
Top Products
Technical Data
3A1570A 55
Techn ical Data
*Full load amps with all devices operating at maximum
capabilities with 210 ft (64.1 m) of hose.
***210 ft (64 m) of heated hose will produce the maximum allowable heat capacity. 310 ft (94 m) of heated hose may
be used, but will have 25% less heat capacity.
Category Data
Maximum Fluid Working Pressure 2000 psi (14 MPa, 138 bar)
Maximum Air Supply Pressure 125 psi (0.9 MPa, 9 bar)
Maximum Air Working Pressure 80 psi (550 kPa, 5.5 bar)
Pressure Ratio 25:1
Air consumption with 02 tip at 1500 psi stall pres-
sure
28 scfm (0.8m
3
/min)
Machine Maximum Power with hose 9000 Watts
Voltage Requirement (50/60 Hz)
(230 V Nominal: 195-253 VAC)
(380 V Nominal: 338-457 VAC)
230 V, 1 Phase
230 V, 3 Phase (Delta)
380 V, 3 Phase (WYE 220 V to Neutral)
Amperage Requirement (Full Load Peak)* 40 amps @ 230 V, 1 Phase
32 amps @ 230 V, 3 Phase
18.5 amps @ 380 V, 3 Phase
Maximum Heater Fluid Temperature 190 °F (88 °C)
Maximum Hose Fluid Temperature 180 °F (82 °C)
Maximum Ambient Temperature 120 °F (49 °C)
Maximum Output 25 lb/min. (11.4 kg/min.)
Output Per Cycle (A and B) 0.025 gal/cycle (0.095 ltr/cycle)
Heater Power 6000 Watts
Hose Power 2790 Watts
Sound Pressure (see NXT air motor manual) 70.2 dB(A)
Sound Power (see NXT air motor manual) 80.1 dB(A)
Viscosity Range 250-1500 centipoise (typical)
Maximum Fluid Inlet Pressure 300 psi (2.1 MPa, 21 bar) or 15% of output pressure
Fluid Inlet/Strainer Filter 20 mesh standard
Air inlet Filter Mesh 40 Micron
Component B (Resin) Inlet 3/4 npt(f) swivel
Component A (Isocyanate) Inlet 3/4 npt(f) swivel
Recirculation/Block Hose Connections Iso (A) side: #5 JIC (m); Resin (B) side: #6 JIC (m)
Maximum Heated Hose Length*** 210 ft of 3/8 ID
Weight 310 lb (140.6 kg)
Wetted Parts Carbon steel, stainless steel, chrome, aluminum,
Fluoroelastomer, PTFE, nylon