Filter
Top Products
Operation
24 3A2012J
Operation
Trigger Lock
Always engage the trigger lock when you stop spraying
to prevent the gun from being triggered accidentally by
hand or if dropped or bumped.
Boom Operation
The height of the boom can be adjusted by adjusting
which link in the chain is secured to the boom arm.
Pressure Relief Procedure and
Shutdown
1. Close the main air supply ball valve.
2. Turn the main air supply pressure regulator fully
counter-clockwise.
3. Disengage the trigger lock on the gun. See F
IG
. 11.
4. With a grounded bucket below the gun, press the
gun against the side of the bucket and pull the trig-
ger to relieve pressure in the fluid lines.
ti18532b
The equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury from
pressurized fluid such as skin injection, splashing fluid
and moving parts, follow the Pressure Relief Proce-
dure when you stop spraying and before cleaning,
checking or servicing the equipment.
NOTICE
Stop the pump at the bottom of its stroke to prevent
fluid from drying on the exposed displacement rod
and damaging the throat u-cup seals.
F
IG
. 10
F
IG
. 11