Graco ti18524d Outboard Motor User Manual


 
System Parts
74 3A2012J
Solvent Pressure Pot Kits
ASME Pressure Pots, 2-gallon 16M893 and 5-gallon 16M894
1304
1305
1302
1301
1303
1309
1310
1306
1307
1311
To assemble strainer (1311), remove the dip tube from tank (1301). Slide
strainer onto bottom end of dip tube. Hold strainer in place while
positioning dip tube. Strainer should be secure on ube and pressed to
bottom of tank. Tighten dip tube in place. Strainer not shown.
Apply pipe sealant.
Clamp ground cable (1311) to handle on tank (1101). Ground cable not
shown.
1
2
3
2
2
2
2
1
2
2
2
3
Ref Part Description Qty
1301 20324-00 TANK, solvent, 2 gallon
(assembly 16M893 only)
1
20324-01 TANK, solvent, 5 gallon
(assembly 16M894 only)
1
1302 16D939 FITTING, nipple, reducing 1
1303 11021-23 PLUG, pipe, 1/4 1
1304 18470-05 VALVE, ball, 2-way, 1/4nptf 1
1305 RM-856-04 FITTING, elbow, 1/4 nptm x
1/4 nptm
1
1306 20655-04 FITTING, elbow, 3/8 nptm x
3/8 tube
1
1307 103347 VALVE, safety, 100 psi 1
1308 21035-00 STRAINER, pick-up, material 1
1309 21462-01 FITTING, adapter, 1/4 nptm x
3/8 nptf
1
1310 3165 VALVE, ball, 2-way,
3/8 female, 3/8 male
1
1311 17440-00 CLAMP, grounding 1