Technical Data
84 3A2012J
Pumpline Technical Data
Catalyst Pump Technical Data
** Series A and B systems (built prior to April 2013) have non-metallic nylon catalyst tube fittings. To covert your system to stain-
less steel fittings, see the FRP Proportioner manual 332451.
Whip Hose Technical Data
Resin Pump, Catalyst Pump, Solvent Pump, and Heater Technical Data
See component manuals listed on page 3 for technical data.
Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . 13:1 Systems: 1300 psi (9 MPa, 90 bar)
17:1 Systems: 1700 psi (11.9 MPa, 119 bar)
Maximum air inlet pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 psi (0.7 MPa, 7.0 bar)
Minimum air inlet pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 psi (0.07 MPa, 0.7 bar)
Maximum ambient air temperature. . . . . . . . . . . . . . . . . . . . . . . 120°F (49°C)
Maximum cycle rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 cpm
Air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Technical Data in air motor manual 3A2315.
Fluid output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13:1 Systems: 1.5 gpm (free flow at 70 cpm)
17:1 Systems: 1.1 gpm (free flow at 70 cpm)
Maximum fluid temperature 160°F (71°C)
NOTE: System rating is lower than this due to other, lower-rated
components.
Stroke length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 in. (51 mm)
Sound data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Technical Data in air motor manual 3A2315.
Wetted parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stainless steel, tungsten carbide with 6% nickel,
UHMWPE, PTFE,
LW100C displacement pump only: Also includes carbon steel
Maximum fluid working pressure
Internal catalyst pump version. . . . . . . . . . . . . . . . . . . . . . . 2000 psi (14.0 MPa,140 bar)
External catalyst pump version . . . . . . . . . . . . . . . . . . . . . . 90 psi (0.63 MPa, 6.3 bar)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 lb (1.6 kg)
Wetted parts**. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301, 303, 304, 316, and 17-4 PH grades of stainless steel,
silicon nitride, acetal, perfluoroelastomer, PE, PTFE, UHWMPE,
polypropylene
Hose bundles maximum fluid working pressure and wetted
materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Catalyst hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000 psi (21.0 MPa, 210 bar); PTFE
1/2 in. resin hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4000 psi (28.0 MPa, 280 bar); nylon
3/8 in. resin hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3300 psi (23.1 MPa, 231 bar); nylon
Solvent/AAC air hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 psi (1.6 MPa, 16 bar); nylon
3/8 in. OD air hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 psi (0.9 MPa, 9 bar); PET
1/4 in. OD atomizing/AAC air hose . . . . . . . . . . . . . . . . . . . 125 psi (0.9 MPa, 9 bar); PET
1/2 in. OD air hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 psi (1.7 MPa, 17 bar); PET