Hitachi SJ700B Marine Battery User Manual


 
DIFFERENCE and COMPATIBILITY
of SJ300 series and SJ700/SJ700D series
Items
Retry or trip parameter
A016:External frequency filter
time const.
A105:[OI]-[L] input start
frequency enable
C025:Terminal [15] function
b012, b212, b312:
Electronic thermal function
d007:
Scaled output frequency monitoring
A038:Jog frequency setting
Removable
Position
Position
Arrangement
Others
055L
075L
110L
055H
075H
Installation
External radiating fin
Option position
SJ-DG
SJ-FB
SJ-DN / SJ-DN2
SJ-PB/PBT, SJ-PB2/PBT2
SJ-LW
Screw diameter
110L/H
300L
450L
370H
SJ300 series SJ700/SJ700D series
You can copy the parameter settings from the SJ300 series into the SJ700 series.
(You cannot copy the parameter settings from the SJ700 series to the SJ300 series because the SJ700
series has many new functions and additional parameters.)
No display mode selection.
(full display)
Basic display mode/Data comparison function addition.
Note:basic display mode.
To display all parameters, specify "00" for "b037".
Instantaneous power failure/under-voltage/
overvoltage/overcurrent:It sets up by b001.
Instantaneous power failure/under-voltage:It sets
up by b001.
overvoltage/overcurrent:It sets up by b008.
Default:01 (external start frequency) Default:00 (0Hz)
Default:08 (instantaneous power failure) Default:40 (cooling-fan speed drop)
You can not change the output frequency
setting by using the and/or key.
055L/H:5mm upper part from SJ300. 300L/H:97mm upper part from SJ300.
Other model:same position.
Those with compatibility.
Those with compatibility.
Note:Since the SJ700 series has many new functions and additional parameters,
some functions of the SJ-DN, SJ-LW, and SJ-PB/PBT (option boards conforming to the open network
specifications) cannot be implemented on the SJ700 series. SJ-DN2, SJ-PB2/PBT2 has compatibility to SJ700-2.
SJ-DN2, SJ-PB2/PBT2 cannot access new paramaters is SJ700D-3.
You can not change the output frequency
setting by using the and/or key.
055 to 110L/H:10mm upper part from SJ300. 300L:77mm upper part from SJ300.
300H:72mm upper part from SJ300. 150 to 185L/220H:29mm upper part from SJ300.
220L:18mm upper part from SJ300. 550L:25mm upper part from SJ300.
Other model:same position.
Setting range:0 to 999Hz
Setting range:
0.01 to 999Hz (0Hz setup is impossible)
Removable
Other model:same position. 055L/H:5mm upper part from SJ300. 300L/H:97mm upper part from SJ300.
M8 (Ground Screw)
150 to 220L/H:RB there is not a terminal.
All the models are possible.
up to 11kW
055L/H: SJ700/SJ700D is in next larger enclosure vs. SJ300. All other models are the same enclosure size.
055L/H:Those with no compatibility.075 to 550L/H:Those with compatibility. Note 2
Other model:same position. 055L/H:5mm upper part from SJ300. 300L/H:97mm upper part from SJ300.
17
17
17
50
50
055 to 110L/H:Two steps, 150 to 550L/H:One step
150 to 220L/H:RB there is a terminal.
15kW or more is possible.
up to 22kW
available not available
16
10
10
35
35
055 to 550L/H:One step
M6 (Ground Screw)
M10 M8
M6 M8
Removable (You can mount the SJ300 series into
the SJ700/SJ700D series.)
Setting upper limit:120% Setting upper limit:100%
Default:8 Default:31 Note 1
d001:
Output frequency monitoring
M6 (Ground Screw) M5 (Ground Screw)
Copying the parameter settings
Parameter display mode.
Change function
Terminal
Minimum value of
UHVLVWRU
Easy-removable Dc bus Capacitor
Dynamic Brake circuit
Dimensions
Digital operator position
Option boards
Control
Circuit
Main
Circuit
Note1: As analog response follows the V/F curve, selection of SLV may require this setting to be reduced.
Note2: 370, 450L/H and 550H:Metal fittings differ.
35