Filter
Top Products
3
-CAUTION-
If BOLTS FEEL LIKE YOUR FORCING THEM
TO THREAD, BACK THEM OUT AND CHASE
TAPPED HOLES WITH A 3/8" -16 TAP.
FORCING THREADING WILL DAMAGE THE
BOLT AND TAPPED HOLE THREADS.
APPLY ANTI SEIZE
PRIOR TO INSTALLING
(PREVENTS THREAD
DAMAGE)
(4” BOLTS
INSTALL IN
REAR BAR)
2. INSTALLING CROSS BAR BOLTS
Applies to both front and rear cross bars
3/8” X 3/4” WASHERS
FROM RIG KIT
FRONT BAR -
STDB OUTBOARD
APPLY RTV SEALANT
AROUND HOLES PRIOR
TO INSTALLATION
STBD HULL - OUTBOARD
FIGURE 3