Humminbird 767 Fish Finder User Manual


 
16
Circular Flasher View
Circular Flasher View displays Real Time Sonar (RTS®) data in the traditional flasher format. Depth
and temperature are always displayed. The digital readouts in the Flasher View cannot be
customized.
Screen Snapshot View
When Screen Snapshot is enabled (from the Accessories menu tab), pressing the MARK key
creates a saved screen capture (when you have an optional-purchase MMC/SD card installed).
Screen Capture View
15
200/83 kHz Split Sonar View
Split Sonar View displays sonar returns from the 83 kHz wide beam on the left side of the screen and
displays sonar returns from the 200 kHz narrow beam on the right side of the screen. Depth is always
displayed in the upper left hand corner. You can use the Split Sonar View to make side by side
comparisons between the sonar returns from the 83 kHz wide beam and the 200 kHz narrow beam.
The digital readouts in the Split Sonar View cannot be customized; therefore, information such as
water temperature and voltage are unavailable in the Split Sonar View.
Big Digits View
Big Digits View provides digital data in a large, easy-to-see format. Depth is always displayed.
Readouts for temperature, speed and Triplog information are displayed automatically if the
appropriate accessory is connected to the 700 Series™ Fishing System. The Triplog shows distance
traveled, average speed, and time elapsed since the Triplog was last reset. The digital readouts in
the Big Digits View cannot be customized.
Big Digits View
Depth
Temperature
Speed
Timer shows the time
elapsed since Triplog
was last reset
Distance is the distance
traveled since the Triplog
was last reset
Voltage - the battery
voltage.
Average Speed shows
the speed since the
Triplog was last reset
200/83 kHz Split Sonar View
Depth
83 kHz
Sonar History
Window
200 kHz
Sonar History
Window
Lower Depth Range
Upper Depth
Range
531427-1_C - 767_Man_Eng.qxd 10/25/2005 10:29 AM Page 24