Filter
Top Products
82
Units - Speed
Units - Speed selects the units of measure for speed-related
readouts, and will appear in the menu if a Temp/Speed Accessory is connected and the
paddlewheel has moved at least once, or if the GPS Receiver is connected.
T
o change the Units - Speed setting:
1. Highlight Units - Speed on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Speed setting.
(kph [International Models only], mph, kts, Default = kph for International models and
mph for Domestic models)
User Mode
User Mode sets the menu system to either Normal or Advanced.
When set to Normal (default setting,) only the basic menu options are shown. When set to
Advanced, additional menu choices are available.
T
o change the User Mode setting:
1. Highlight User Mode on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the User Mode setting.
(Normal, Advanced, Default = Normal)
Language
(International only)
Language selects the display language for menus. International Models only.
T
o change the Language setting:
1. Highlight Language on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Language setting.
(Default = English)
81
Units - Depth
Units - Depth selects the units of measure for all depth-related
readouts.
T
o change the Units - Depth setting:
1. Highlight Units - Depth on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Depth setting.
(Meters [International Models only], Feet, Fathoms; Default is Meters for International
models, and Feet for Domestic models)
Units - Temp
(International only)
Units - Temp selects the units of measure for all temperature-related readouts. International
Models only.
T
o c
hange the Units - Temp setting:
1. Highlight Units - Temp on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Temp setting.
(Celsius, Fahrenheit; Default = Celsius)
Units - Distance
Units - Distance selects the units of measure for all distance-
related readouts, and will appear in the menu if a Temp/Speed Accessory is connected and the
paddlewheel has moved at least once, or if the GPS Receiver is connected.
T
o change the Units - Distance setting:
1. Highlight Units - Distance on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Distance setting.
(Domestic Models: Statute Miles, Nautical Miles; Default = Statute Miles; International
Models: Meters/Kilometers, Meters/Nautical Miles, Feet/Statute Miles, Feet/Nautical
Miles; Default = Meters/Kilometers)
531427-1_C - 767_Man_Eng.qxd 10/25/2005 10:30 AM Page 90