78
Off Course Alarm
Off Course Alarm sounds when the boat has moved too far off
course based on the menu setting when navigating. Off Course Alarm allows you to set how far
the boat is allowed to move off course before the Off Course Alarm will sound.
T
o chang
e the Off Course Alarm setting:
1. Highlight Off Course Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Off Course Alarm
setting. (Off, 25 to 3000 feet, 10 to 1000 meters [International Models only], Default =
300 ft, 100 m)
Arrival Alarm
Arrival Alarm sounds when the boat has either exceeded the
distance to the destination waypoint, or has entered the Arrival Alarm Circle, based on the menu
setting when navigating. Arrival Alarm allows you to set how close the boat must be to the
destination waypoint before the Arrival Alarm will sound.
T
o change the Arrival Alarm setting:
1. Highlight Arrival Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Arrival Alarm setting.
(Off, 25 to 3000 feet, 10 to 1000 meters [International Models only], Default = 150 ft,
50 m)
Arrival Alarm Circle
Off Course Limits
77
Low Battery Alarm
Low Battery Alarm sounds when the input battery voltage is
equal to or less than the menu setting. The battery alarm will only sound for the battery that is
connected to the 700 Series™ Fishing System. The Low Battery Alarm should be set to warn you
when the battery voltage drops below the safety margin that you have determined. For instance,
if you are running a trolling motor (battery operated), you would want to set the Low Battery
Alarm to sound before the battery voltage drops too low for it to be used to start your main,
gasoline-powered engine.
T
o change the Low Battery Alarm setting:
1. Highlight Low Battery Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Low Battery Alarm
setting. (Off, 8.5V - 13.5V, Default = Off)
Temp Alarm
Temp Alarmsounds when the water temperature detected
by the 700 Series™ reaches the Temp Alarm setting, which is either set in degrees Fahrenheit
or Celsius [International Models only]. For example, if the Temp Alarm is set to 58 degrees
Fahrenheit, and the water temperature falls from 60 degrees to 58 degrees, the Temp Alarm
will sound. Similarly, if the water temperature rises from 56 degrees to 58 degrees, the Temp
Alarm will also sound.
T
o change the Temp Alarm setting:
1. Highlight Temp Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Temp Alarm setting.
(Off, 33-120 [Fahrenheit], 0-50 [Celsius], Default = Off)
531427-1_C - 767_Man_Eng.qxd 10/25/2005 10:30 AM Page 86