ICOM-200 / 201
Power outputs
The power outputs of the ICOM-200/201 are extended outputs of the Tiny-
Tiger
®
, which are equiped with a driver IC type TD62083 or compatible. The
outputs have the physical address 00h and can be (with an offset of –10h)
accessed with the port address 10h by the software.
2
The power outputs are lead to the 37-ch. Sub-D connector. The pin OVCC is
connected to a internal protector diode, so the outputs are secured against
overvoltage. This pin normally should have the same voltage potential as the
voltage to be switched.
Power outputs DB-37 Pin
Out 0 23
Out 1 4
Out 2 22
Out 3 3
Out 4 21
Out 5 2
Out 6 20
Out 7 1
OVCC 5
Wilke Technology GmbH • 0241 / 918 900 • http://www.wilke.de/ • support@wilke.de 2-13