Filter
Top Products
ICOM-200 / 201
Analog inputs
The analog inputs have a hardware resolution of 10 bit, nevertheless by
software interpolation a resolution of 12 bit can be achieved. More detailled
information can be found in the BASIC-Tiger
®
„Device driver“ manual.
2
To allow the universal use of Tiny-Tiger
®
analog inputs, each channel is
equiped with an OpAmp. With this circuitry not only an amplification factor can
be set, but also a different configuration of the inputs is possible. Three
different configurations can be set:
0...5V DC
0...10V DC
0...20mA
Analog channel DB37 socket
An0 32
An1 14
An2 33
An3 15
AGND 34
Wilke Technology GmbH • 0241 / 918 900 • http://www.wilke.de/ • support@wilke.de 2-15