Filter
Top Products
ICOM-241
Analog inputs
The analog inputs of the ICOM-241 have an input range from 0...5V DC. The
hardware resolution is 10 bit and can be raised to 12 bit by software
interpolation when needed. To be able to measure small signals each analog
input is equipped with an OpAmp. The amplification can be set to a value
between 1 and 10 by potis.
3
View of components side with potis of analog amplifiers
Analog channels DB25 socket
An0 22
An1 23
An2 24
An3 25
Pin layout of DB25 connector (analog channels)
Wilke Technology GmbH • 0241 / 918 900 • http://www.wilke.de/ • support@wilke.de 3-11