42
5
MEMORY OPERATION
■ Memory channel screen
The memory channel screen simultaneously shows 9
memory channels and their programmed contents.
You can select a desired memory channel from the
memory channel screen.
•Selecting a memory channel using the
memory channel screen
q If the start up screen is not selected (if [F-5]’s func-
tion is [EXIT]), push [F-5] one or more times to exit.
w Push [
(F-3)MEMORY] to select the memory chan-
nel screen.
e Rotate the tuning dial while pushing [
(F-2)
SET] to
select the desired memory channel.
r Push [
(F-5)
EXIT] to exit the memory channel
screen.
•Confirming programmed memory
channels
q Select the memory channel screen as described
above.
w Rotate the tuning dial while pushing [(F-1)ROLL] to
scroll the screen.
e Push [(F-2)SET] to select the highlighted memory
channel, if desired.
r Push [(F-5)EXIT] to exit the memory channel
screen.
•Setting a memory channel as a select
memory
Select memory channels are used for select memory
scan. Select memory scan repeatedly scans the se-
lect memory channels only. This is useful to speedup
the memory scan interval. Of course, select memory
channels are also scanned during normal memory
scan.
q Select the memory channel screen as described
at left.
w Rotate the tuning dial while pushing [(F-2)
SET] to
select the desired memory channel.
e Push [
(F-3)SELECT] to set the memory channel as
a select memory or not.
r Repeat steps w to e to program another memory
channel as a select memory channel, if desired.
t Push [
(F-5)EXIT] to exit the memory channel
screen.
NOTE: Setting select memory channels is also
possible in the scan screen.
channel is selected.
