55
8
SET MODE
Power-ON timer set
This item sets the power-on time.
See p. 51 for details.
Time (now)
This item sets the current time for the built-in 24-hour
clock.
See p. 51 for details.
■ Timer set mode
15:00
Push [(F-4)SET] to enter the time.
15:00
Push [(F-4)SET] to enter the time.
Power-OFF period
This item sets the power-off period for automatic shut-
down after the power-on timer has turned power ON.
See p. 52 for details.
60min
Push [(F-4)SET] to enter the time.
Filter (9MHz)
When an optional 9 MHz filter is installed, this selec-
tion is necessary, otherwise, the filter cannot be se-
lected.
FL-223, FL-100, FL-232, FL-101 and “NONE” are se-
lectable. See p. 28 for details.
Calibration marker
This item is used for a simple frequency check of the
transceiver.
See p. 65 for calibration procedure.
Turn the calibration marker OFF after checking the
frequency of the transceiver.
■ Miscellaneous (others) set mode
ON OFF
Calibration marker ON Calibration marker OFF
(default)
NONE
FL-223
FL-100
No optional 9 MHz filter is installed.
(default)
FL-223 optional filter is installed.
FL-100 optional filter is installed.
Filter (455kHz)
When an optional 455 kHz filter is installed, this se-
lection is necessary, otherwise, the filter cannot be se-
lected.
FL-222, FL-52A, FL-53A and “NONE” are selectable.
See p. 28 for details.
NONE
FL-222
FL-52A
No optional 455 kHz filter is installed.
(default)
FL-222 optional filter is installed.
FL-52A optional filter is installed.
