Filter
Top Products
v
Safety Guidelines
Before you remove a server cover, observe these safety guidelines:
• Only technically qualified personnel should integrate the server.
• Turn off all peripheral devices connected to the server.
• Turn off the server using the push-button on/off power switch on the front panel of the server,
and unplug the AC power cord from each power supply or wall outlet.
• Label and disconnect all peripheral cables attached to the I/O panel on the back of the server.
• Provide some electrostatic discharge (ESD) protection by wearing an antistatic wrist strap
attached to chassis ground of the server—any unpainted metal surface—when handling
components.
Server Precautions
WARNINGS
SERVER POWER ON/OFF: The push-button on/off power switch on the
front panel of the server does not turn off the AC power. To remove AC
power from the server, you must unplug each AC power cord from each
power supply or wall outlet.
HAZARDOUS CONDITIONS—POWER SUPPLY AND POWER SHARE
BACKPLANE: Hazardous voltage, current, and energy levels are present
inside the power supply and the power share backplane enclosures. There
are no user-serviceable parts inside them; servicing should only be done
by technically qualified personnel.
HAZARDOUS CONDITIONS—DEVICES AND CABLES: Hazardous electrical
conditions may be present on power, telephone, and communication
cables. Turn off the server and disconnect telecommunications systems,
networks, modems, and each power cord attached to the server before
opening it. Otherwise, personal injury or equipment damage can result.
AVOID INJURY: To avoid personal injury when unpacking the server, use
only a mechanical assist unit to lift it off the shipping pallet. The
minimum server configuration weighs 38 kg (85 lbs); the maximum weighs
45 kg (100 lbs).
Do not attempt to lift or move the server by the handles on the power
supplies.
Use only a hand-truck or other mechanical assist unit to move the server
from one location to another.