Filter
Top Products
17
Programmable Function Con FM Con P25
Trunk
P25
Status
1,2,7
✓
Mix
✓
System Search N/A N/A
✓
Tactical Group
1
✓
Mix N/A
Talk Around
✓ ✓ ✓
Talkgroup
2
Mix
✓
N/A
Tone
✓ ✓ ✓
Vibrator
1
✓ ✓ ✓
VOX
✓ ✓ ✓
Zeroize
✓ ✓ ✓
Zone Down
✓ ✓ ✓
Zone Select
9
✓ ✓ ✓
Zone Up
✓ ✓ ✓
1
2-tone, Scan Program, Selcall, Selcall Status, Status, Send the GPS
Data, Tactical Group, and Vibrator are available only on the TK-5210/
TK-5310.
2
2-tone, Autodial, Clock, Display Character, Individual, Key Delete,
Keyset, Light, Operator Selectable Tone, OST Down, OST Up, Rekey
Request, Scan Program, Scrambler/ Encryption Code, Selcall, Selcall
Status, Squelch Level, Status, and Talkgroup are available only on
K2/K3/K5/K6/K7 model transceivers.
3
Channel Select can be programmed only on the Selector knob.
4
Emergency can be programmed only on the Auxiliary (orange) key
and the optional speaker/ microphone PF1 (orange) key.
5
Keyset and Rekey Request can be used when set as P25 OTAR.
6
Playback is available only if the VGS-1 optional board has been
installed.
7
Selcall, Selcall + Status, Send the GPS data, and Status cannot be
used when the transmit mode is set as Conventional P25.
8
Speaker Attenuation can be programmed only on the microphone
programmable function keys.
9
Zone Select can be programmed only on the Selector knob, the
Concentric switch, and the Lever switch.