Filter
Top Products
18
BASIC OPERATIONS
Switching power on/ oFF
Turn the Power switch/ Volume control clockwise to switch the
transceiver ON.
Turn the Power switch/ Volume control counterclockwise to
switch the transceiver OFF.
■ Transceiver Password
K2/K3/K5/K6/K7 model transceivers may be password
protected. If the transciever is protected, “INPUT
PASSWORD” will appear on the display when the power
is turned ON. To unlock the transceiver, enter the correct
password:
1 Enter a character using the Side 2 and Side 3 keys.
• On K3/K6 model transceivers, you can enter the password
by pressing the DTMF keys instead.
2 Press SET (D> key) to accept the character.
• This step is unnecessary when using the keypad.
3 Repeat steps 1 and 2 to enter the entire password.
• Press DEL (B key) to delete an incorrectly entered
character. Press and hold DEL to delete all characters.
4 Press CNF (A key) to confirm the entry.
• If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.
• The password can contain a maximum of 6 digits.