Filter
Top Products
19
AdjuSting the volume
Rotate the Power switch/ Volume control to adjust the volume.
Clockwise increases the volume and counterclockwise
decreases it.
Selecting A Zone And chAnnel
Select the desired zone using the selector knob or the keys
programmed as Zone Up/ Zone Down. Each zone contains a
group of channels
Select the desired channel using the selector knob or the keys
programmed as Channel Up/ Channel Down. Each channel
is programmed with settings for transmitting and receiving.
• The default setting for the selector knob is Channel Select.
K2/K3/K5/K6/K7 model transceivers may have names
programmed for zones and channels. Each name can contain
up to 16 character. While selecting a zone, the zone name will
appear above the channel name for approximately 2 seconds.
• If programmed by your dealer, your transceiver will announce the
zone and channel numbers as you change them.