Filter
Top Products
33
AutodiAl (k2/k3/k5/k6/k7 modelS only)
Autodial allows you to quickly call DTMF numbers that have
been programmed onto your transceiver.
1 Press the key programmed as Autodial.
• The first entry in the Autodial list appears on the display.
2 Press the Side 2 and Side 3 keys or enter the appropriate
DTMF number (01 ~ 32) to select your desired Autodial list
number.
• The stored entry appears on the display.
3 Press the PTT switch to make the call.
• Alternatively, you can press the <C key to transmit the selected
DTMF number, rather than making a call.
Stun code <tk-5210/ tk-5310 only>
This function is used when a transceiver is stolen or lost.
When the transceiver receives a call containing a stun code,
either transmit mode will be disabled, or both receive mode
and transmit mode will be disabled. The stun code is cancelled
when the transceiver receives a call with a revive code.