Filter
Top Products
51
Settings
To select a Temperature Averaging interval:
1. Highlight the Temperature Averaging box on the Installation menu.
2. Press the keypad left/right to select the desired interval and press
ENTER.
Transducer Type
Selects the transducer model connected to your display unit. In some transducers
with built-in temperature sensors, the temperature may not be accurate if the correct
transducer is not selected from the Transducer Type menu.
To select a Transducer Type:
1. Highlight Transducer Type box on the
Installation menu and press ENTER.
The Select Transducer menu will
appear.
2. Use the keypad to your transducer
type and press ENTER.
3. Highlight OK and press ENTER.
Transducer type menu