Filter
Top Products
71
Settings
To select a scope:
1. Highlight Scope on the selected device’s data source menu and
press ENTER.
2. Use the keypad to select Global or Local and press ENTER.
Reset Global and Reset Local
Selecting Reset Global will reset all the source selections to default settings and
removes all instances on all networked HDS units.
Reset Local is used to change all source selections on your HDS unit from Local to
Global.
To reset global or local sources:
1. Highlight Reset Global or Reset Local and press ENTER. A conrma-
tion message will appear.
2. Select Yes and press ENTER.
Device List
Displays a list of devices connected to a NMEA
2000 network.
To access the device list, Select Device List from
the Network menu and press ENTER.
From the Device List you can:
• View device data
• Change the device instance
• Congure device alarms
• Congure devices
• Calibrate devices
• Enable/disable WAAS/EGNOS/MSAS for GPS antenna by
conguring HDS iGPS
Device Menu
Controls the way data is displayed on the Device list. To
access the Device menu, highlight the desired device and press
MENU.
Device List