Filter
Top Products
70
Sonar Color Mode command with FishReveal selected
(at left, dual-frequency menu; at right, single-frequency menu).
To turn FishReveal on:
1. From the Sonar Page, press
MENU|↓ to SONAR FEATURES|ENT.
2. Press →|then press ↓ to
SONAR CHART MODE|ENT|↓ to FISHREVEAL|ENT.
3. Press
EXIT|↑ to AUTO SENSITIVITY|ENT|↑ to SENSITIVITY|ENT.
4. Press ↑ until the Sensitivity Control Bar reads 100% (or close to it),
then press
EXIT. (If you reach the maximum limit, a tone sounds.)
Sonar chart in regular grayscale mode, left, and in FishReveal mode,
right. Notice how shallow fish formerly hidden in the surface clutter
become visible in FishReveal mode.
NOTE:
Water conditions vary greatly, and that affects sonar performance.
Under certain conditions, FishReveal will show you more fish than
normal grayscale mode, but the reverse will be true in other cir-
cumstances. We suggest you become familiar with both modes so
you can best match your sonar's performance to the current water
conditions.
Visible
fish
Fish
not
visible
Fish
arch
Fish
arches