Filter
Top Products
75
Noise Rejection
See the entry on Advanced Signal Processing in this section.
Overlay Data
To change the digital data shown "floating" on top of the Sonar Page or
the Map Page:
First, press
PAGES, use → or ← to select a Page Name, then press EXIT.
To select data for display:
1. From the Map or Sonar page, press MENU|↓ to OVERLAY DATA|ENT.
2. Press ↓ or ↑ to select Data Type|
ENT.
Overlay Data command on the Sonar Menu, at left. Overlay Data
Shown selection menu, right. In this example, we scrolled down the
data list to highlight "Ground Speed."
When selected, the data type shifts to the top of the data list and a
check mark appears beside the data type. (If you wish, you may now
use ↓ or ↑ to select other Data Types for display.)