Filter
Top Products
18
Front view (left) and side view (right) showing dimensions of the X47
when mounted on quick release bracket.
If you wish, you can fill in the hole around the cable with a good marine
caulking compound. (Some marine dealers stock cable hole covers to
conceal the opening.) No matter what type of installation you prefer, be
sure to leave enough slack in the cable to allow tilting or swiveling the unit.
For the X47EX
If you choose to fill in the cable hole, be sure to position the cable against
the rear edge of the hole as you apply the fill material.
Before positioning the gimbal bracket, be sure to hold the cable against
the rear edge of the hole. Then, slide the bracket over the hole and butt
the rear of the bracket base firmly against the cable, thus pinning it in
place against the side of the hole. Finally, fasten the bracket to the dash.
Install the gimbal bracket. Orient the bracket so the arms slope toward
the front of your unit.
Millimeter
[Inch]
82.7
[3.26]
12.09 [0.48]
107.5
[4.23]
76.9
[3.03]
156
[6.26]
70.3
[
2.77
]
Front