Filter
Top Products
56
3. To return to the previous page, press
EXIT|EXIT.
To change displayed data font size:
1. Press MENU|↓ to OVERLAY DATA|ENT.
2. Press ↓ or ↑ to select Data Type, then press
ENT. The DATA SIZE
(displayed in the bottom of the Overlay Data Shown window) cycles
through available sizes. Keep pressing
ENT until it shows the desired
Data Size
, then press EXIT.
The selected data type will be displayed in the new size. (To change the
font size for another Data Type, press
ENT and repeat these steps,
beginning with step two above.)
3. To return to the previous page, press
EXIT.
Tip:
If you wish, you can change the displayed data font size when you
select a data type:
1. Press
MENU|↓ to OVERLAY DATA|ENT.
2. Press ↓ or ↑ to select Data Type|press
ENT. repeatedly until the
desired font size is shown.
The data will be shown in the new font size. To return to the
previous page, press
EXIT|EXIT.
Sonar chart with Overlay Data turned on. This example shows
Depth, Water Temperature and the Water Speed of the boat.
Ping Speed & HyperScroll
Ping Speed controls the rate at which the transmitter and transducer
broadcast sonar sound waves — pings — into the water. The unit has a
default ping speed of 50 percent. At normal boating speeds, this
automatically provides enough return echoes to refresh the screen and
scroll the chart at maximum chart speed.