Filter
Top Products
63
The Main Menu with Software Information command selected.
1. Press MENU|MENU|↓ to SOFTWARE INFO|ENT.
2. Read the information displayed on the screen.
3.
To return to the last page displayed, press EXIT|EXIT.
Sonar Chart Mode
Grayscale is the default setting for the sonar chart, but we offer other
variations to suit your viewing preferences. You can select the chart to
be displayed in grayscale, reverse grayscale, bottom black, or
fishreveal.
To change the chart mode scheme:
1. From the Sonar Page, press
MENU|↓ to SONAR FEATURES|ENT.
2.
. Press ↓ to SONAR CHART MODE|ENT.
3. Press ↓ or ↑ to
Mode Name
|ENT.
4. Press
EXIT|EXIT to return to the Sonar Page.
Sonar Page & Sonar Chart Display Options
This unit offers four chart display options. To cycle through them, press
EXIT to clear any menus, then press ENT repeatedly until the desired
mode appears.
Full Sonar Chart
This is the default mode used when the unit is turned on for the first
time or when it's reset to the factory defaults.
The bottom signal scrolls across the screen from right to left. Depth
scales on the right side of the screen aid in determining the depth of