Filter
Top Products
70
To switch to zoom:
1. Press
MENU|↓ to ZOOM LEVEL|ENT.
2. The Zoom Level menu appears. Press ↓ or ↑ to select the desired
zoom level, then press
ENT|EXIT to set the zoom and clear the menu.
3. To select a different zoom or turn zoom off, repeat steps 1 and 2.
To turn on the Zoom Bar:
1. Press
MENU|↓ to SONAR FEATURES|ENT.
2. The Sonar Features menu appears. Press ↓ to
ZOOM
BAR|ENT|EXIT|EXIT.
3. To turn off the Zoom Bar, repeat steps 1 and 2.
At left, Sonar Page, normal view. Center, same view zoomed to 2X.
Right, same view zoomed to 4X
Tip:
From the Sonar Menu, you can go directly to the Zoom Level
command with one keystroke. Instead of pressing the down arrow
(↓) to reach the command, press the up arrow (↑) instead. This will
take you from "Sensitivity" to "Zoom Level," because the menu
"wraps" around in a circle. This trick also works on the main menu!
Zoom Pan
Your unit has the handy ability to quickly zoom in on any portion of the
water column with just the touch of an arrow key. The Zoom Pan feature
lets you rapidly move the zoomed area up and down to different depths.
By "pointing" your zoom at different portions of the chart as it scrolls,
you can get a good, close-up look at structure or cover below you.
To use Zoom Pan, switch to a manual depth Range setting (see page 46)
and turn on 2X or 4X Zoom. Then, simply press ↑ or
↓ to pan up and
down the water column.