Filter
Top Products
ENGLISH
29
The following adjustments can be made:
– Keystone H, V
Adjust trapezoid image to rectangle image.
– Auto Adjust
For RGB input, set RGB system on the System menu to “Auto”.
Yes: For RGB IN signal, Picture Shift V and H, Size V and H, and Phase are adjusted automatically.
No : If something wrong with AUTO Adjust, select No, and adjust Size V, Size H, Picture Shift H, Picture Shift V, and/or Phase
manually.
Use
1 / 2 button to select “Yes”, and press the ENTER button.
– Picture Shift V, H
Adjust the position of the picture. H adjusts the horizontal position of the picture. V adjusts the vertical position of the picture.
– Size V, H
Adjust the vertical and horizontal size of the picture.
– Phase
Adjust the phase of the DMD
TM
dots and the computer signal input from the RGB IN. Adjust the picture to where it looks
clearest.
❖ Setting the Display Menu
1. Select the desired menu item and press the 2 button.
An adjustment bar appears on the screen.
2. Press the 1 and 2 buttons to adjust picture quality.
3. Press the 3 button to enter the adjustment and return to menu item selection.
INPUT ASPECT
MENU V-MUTE
ENTER
3.
1, 2
3.
1, 2
Keystone-V (Electronic vertical
keystone correction)
Keystone-H (Electronic horizontal
keystone correction)
Auto Adjust
Picture Shift V
Size V
Picture Shift H
Size H
Phase
Item Adjustments
Down
Small
Left
Small
Backward
Up
Large
Right
Large
Forward
Yes / No
Picture Adjust
Menu User A1
Setting
Display
System
Config
Trigger 2
Preset
Keystone V
Keystone H
Auto Adjust
Picture Shift V
Size V
Picture Shift H
Size H
Phase
0
0
0
0
0
0
16
Display