Mitsubishi Electronics HF-SN Outboard Motor User Manual


 
5. WIRING OPTION
5 - 17
5.3 Servo motor power cable
These cables are servo motor power cables for the HF-KN series servo motors.
The numbers in the cable length field of the table indicate the symbol filling the underline "_" in the cable
model. The cables of the lengths with the symbols are available.
Refer to section 4.2.1 for wirings.
Cable length
Cable model
0.3 m 2 m 5 m 10 m
IP rating Bending life Application
MR-PWS1CBL_M-A1-L 2 5 10 IP65 Standard Load-side lead for HF-KN servo motor
MR-PWS1CBL_M-A2-L 2 5 10 IP65 Standard
Opposite to load-side lead for HF-KN
servo motor
MR-PWS1CBL_M-A1-H 2 5 10 IP65
Long
bending life
Load-side lead for HF-KN servo motor
MR-PWS1CBL_M-A2-H 2 5 10 IP65
Long
bending life
Opposite to load-side lead for HF-KN
servo motor
MR-PWS2CBL03M-A1-L 03 IP55 Standard Load-side lead for HF-KN servo motor
MR-PWS2CBL03M-A2-L 03 IP55 Standard
Opposite to load-side lead for HF-KN
servo motor
(1) Connection of servo amplifier and servo motor
1)
Servo motor
HF-KN
MR-PWS1CBL_M-A2-L
MR-PWS1CBL_M-A2-H
MR-PWS2CBL03M-A2-L
1)
Servo motor
HF-KN
MR-PWS1CBL_M-A1-L
MR-PWS1CBL_M-A1-H
MR-PWS2CBL03M-A1-L
or
(Note) CNP2
Servo amplifier
Servo amplifier
power supply
connector
Note. The name and shape of connector differ depending on the servo amplifier types. For connector details, refer to
each servo amplifier instruction manual.
Cable model 1) Servo motor power-side connector
MR-PWS1CBL_M-A1-L
MR-PWS1CBL_M-A2-L
MR-PWS1CBL_M-A1-H
MR-PWS1CBL_M-A2-H
Connector: KN4FT04SJ1-R
Hood, socket insulator
Bushing, ground nut
Contact: ST-TMH-S-C1B-100-(A534G)
Crimping tool: CT160-3-TMH5B
(JAE)
MR-PWS2CBL03M-A1-L
MR-PWS2CBL03M-A2-L
Connector: KN4FT04SJ2-R
Hood, socket insulator
Bushing, ground nut
Contact: ST-TMH-S-C1B-100-(A534G)
Crimping tool: CT160-3-TMH5B
(JAE)
U
V
W
1
2
3
4
View seen from wiring side.