Filter
Top Products
MT-62HS — PARTS & OPERATION MANUAL — REV. #2 (12/15/03) — PAGE 11
Definition of Tamping Rammer
The Mikasa MT-62HS Tamping Rammer is a powerful
compacting tool capable of applying a tremendous force in
consecutive impacts to a soil surface. Its applications include
soil compacting for backfilling for gas pipelines, water pipelines
and cable installation work.
The impact force of the MT-62HS levels and uniformly compacts
voids between soil particles to increase dry density.
Circular motion is converted to create impact force. The MT-62HS
tamping rammer develops a powerful compacting force at the
foot of the rammer. To maintain optimum performance, proper
operation and service are essential.
Construction of Tamping Rammer
The Mikasa MT-62HS is equipped with an Robin air cooled, oil-
injected two cycle gasoline engine. Transmission of the power
takes place by increasing the engine speed to engage the
centrifugal clutch.
Rammer Gearbox and Spring Cylinder
The Mikasa MT-62HS uses an oil bath lubrication system. Always
check the oil level through the oil level sight glass at the rear of
the tamper foot.
Controls
Before starting the MT-62HS Tamping Rammer identify and
understand the function of the controls, see Figure 1 on page 13.
MT-62HS — GENERAL INFORMATION