Filter
Top Products
81
Setup Instructions
Window Page with Sidelooker –
You can combine a Sidelooker view with the Window Page display. Figure
4-20 shows an example where the Sidelooker view has been combined
with the Zoom Mode in the Window Page. Notice that, again, the display
is split vertically down the middle. There is another vertical division
between the parts of the Zoom display. To reach this view, press the
< or > control on the Page Control Pad until the Window Page is dis-
played. Press the
SETUP
button. Press V until you see the Window Menu
Item. If the Sidelooker is enabled, Window options A through H will be
available. Select F, G, or H to specify a Sidelooker window, and press
CLEAR
. Next, press
ZOOM
. The unit will present the FishFinder, Sidelooker,
and Zoom information on the same screen.
Resetting the Unit to Factory Defaults
It is easy to reset all of the settings on the FishFinder at the same time.
When the unit is off, hold the
CLEAR
button. Press the
PWR
button to turn on
the unit. (Release the
PWR
button first; then, one to two seconds later,
release the
CLEAR
button.) All of the settings will be reset to the values
listed below, and the trip log will be reset to zero.
Fig. 4-20
Window Page
with Option G
Selected and
Zoom Enabled