Filter
Top Products
English - 20
Storing Channels in Memory (Automatic Method)
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
2 Press the ▲ or ▼ button to select Auto Program, then press the ENTER
button.
3 Press the ▲ or ▼ button to select an antenna connection, then press the
ENTER button.
➢
Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna signals.
4 When selecting the Cable TV system:
Press the ENTER button to start the auto program.
Press the ▲, ▼, ◄ or ► to select the correct analog signal cable system source
among STD, HRC, and IRC, then press the ENTER button. If you have Digital
cable TV, select the cable system signal source for both Analog and Digital.
➢
STD, HRC, and IRC identify various types of cable TV systems. Contact
your local cable company to identify the type of cable system that exists in
your particular area. At this point the signal source has been selected.
5 The TV begins memorizing all available stations.
After all the available channels are stored, the TV starts to remove scrambled
channels (see page 46). The Auto program menu then reappears.
If you want to stop Auto Programming, press the ENTER button.
The Stop Auto Program? message will be displayed. Select Yes by pressing
the ◄ or ► button, then press the ENTER button.
Press the EXIT button to exit.
Auto Program
Auto Program is completed.
56 channels are memorized.
DTV Air : 20 Air : 11
DTV Cable : 15 Cable : 10
ReturnEnter
OK
Auto Program
Select the cable system.
Analog
Digital
HRC IRC
HRC IRCSTD
Auto Program
Select the Antenna source to memorize.
Air
Cable
Auto
ReturnEnter
Move
Start
Start
Auto Program
Auto Program in Progress.
Stop
Cable 3
3%
DTV Air : 5 Air : 4
DTV Cable : -- Cable : --
Enter Return
Channel
Antenna : Air
Auto Program
►
Channel List
Clear Scrambled Channel
Fine Tune
Signal Strength
Start
Start
ReturnEnterMove
STD
Auto Program
OK
Removing scrambled channel.
DTV Cable 41
77%
DTV Air : 5 Air : 4
DTV Cable : 7 Cable : 5
ReturnEnter
Auto Program
Stop Auto Program?
77%
DTV Air : 5 Air : 4
DTV Cable : 7 Cable : 5
ReturnEnter
No
Yes
Move
BN68-01580A-Eng.indb 20 2008-05-28 오후 9:43:06