Filter
Top Products
English - 72
Auto Wall-mount adjustment (Sold separately)
Once the auto wall mount is installed, the position of your TV can be easily adjusted.
Entering the menu
1 Press the ▲, ▼, ◄ or ► button on your remote control.
➢
The Wall Mount Adjustment screen is displayed.
➢
If the Wall Mount Adjustment screen is not displayed when clicking on a
direction button while watching your TV, use the menu to display that screen.
• Press the MENU button to display the menu. Press the ▲ or ▼ button to
select Setup, then press the ENTER button.
• Press the ▲ or ▼ button to select External Settings, then press the
ENTER button.
• Press the ▲ or ▼ button to select Wall-Mount Adjustment, then press the
ENTER button.
Remembering the Position
2 Adjust to the desired position using the ▲, ▼, ◄, ► buttons.
➢
If you press an arrow button when no OSD is displayed on the TV screen, the
Adjustment screen appears.
➢
Press the INFO button to reset. Press the ◄ or ► button to select Yes, then
press the ENTER button. The position is initialized to the default setting.
3 Press the Blue button.
Press the ▲ and ▼ buttons to select a save mode from either Position1,
Position2 or Position3 in order to save the current position.
➢
To not save the current position, press the RETURN button.
➢
When selecting a save mode, you cannot use the Color buttons.
4 Press the ENTER button to save.
➢
When Position1 is selected, the message Current position saved as
Position1 is displayed.
5 Press the ENTER button.
➢
The saved Position appears on the left side of the OSD.
Moving to the remembered position
1 Complete Step 1 of Entering the menu.
2 Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to the
saved position.
➢
You can move the wall mount to one of the 3 pre-set positions by pressing
the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.
➢
If you adjust the positon after moving to a pre-set position, the position
display will disappear.
➢
For installation, refer to the Installation Manual provided with the wall mount.
➢
For product installation and the installation and moving of the wall mount, make sure to consult a specialized
installation company.
➢
This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building
materials, please contact your nearest dealer.
➢
The auto wall mount will not work when Anynet+.
TV Rear Panel
Auto Wall-Mount
EX-LINK Cable (Not supplied)
Save
Adjust
Enter
Select a mode to Save.
Position1
Position2
Position3
Return
Wall-Mount Adjustment
Adjust
Position
1 2 3
Center
Save
External Settings
Melody : On
Wall-Mount Adjustment
ReturnEnter
Move
Wall-Mount Adjustment
Position1
Adjust
Position
1 2 3
Center
Save
BN68-01580A-Eng.indb 72 2008-05-28 오후 9:43:53