Ski-Doo RXT Series Jet Ski User Manual


 
PRE-RIDE INSPECTION
Hull
Inspect hull for cracks or damage.
Jet Pump Water In take
Remove weeds, s hells, d ebris or any-
thingelsethatcouldrestricttheflow
of water and damage propulsion unit.
Clean as necessary. If any o bstruction
can not be removed, refer to a n autho-
rized Sea-Doo dealer for servicing
F18J04Y
21
TYP ICAL — INS PECT THESE AREA S
1. W ater intake
2. Ride plate
WARNING
When operating the engi ne while
the watercraft is out of the water,
the heat exchanger in the ride plate
may become very hot. Avoid any
contact with ride plate as burns
may occur.
Bilge
Should water be presen t in the bilge,
tilt the watercraft to the rear and un-
screw drain plugs to completely empty
the bilge.
Secure bilge drain plugs.
WARNING
Make sure drain plugs are properly
secured prior to launching the wa-
tercraf t in water.
Battery
WARNING
Verify tig htness of battery cables
to their posts and condition of bat-
tery retaining fasteners. Do not
charge or boost battery while in-
stalled.
All M ode ls Exce pt GTI and RXP
Battery is located under seat in bilge.
1
F18H0AY
TYP ICAL
1. Battery
GTI and RX P Model s
Battery is located u nder storage bin i n
front storage compartment.
34
_______
SAFETY INFORMATION
________