Filter
Top Products
CONTROLS/INSTRUM EN TS/EQ UIPME NTS
smo2008-001-047_a
TYP ICAL
1. Propulsion system connections
Proceed w ith the in stallation of the
other ballast ta nk .
Then, ballast tanks are ready to be
filled.
To Fill
Ballasts are filled by jet pump pressure.
Watercraft wi ll need to move forw ar d
in order to fill the ballasts.
WARNING
NEVER fill only one ballast tank,
uneven added weight of the bal-
last could affect the handling cha r-
acteristics of the watercraft.
Close ballast tank drain plug.
smo2008-001-050_a
TYP ICAL
1. D rain plug
Position both ballast tank valves to ON
position.
smo2008-001-043_a
1. Valves location
ssi2008-001-303_a
TYP ICAL
1. Port side tank
2. Starboard side tank
With engine running and s hift lever
in forward position, depress throttle
lever to increase watercraft speed, bal-
last tanks will start to fill up.
Continue filling until water com e out
from tanks overflow holes.
smo2008-001-049_a
TYP ICAL
1. Overflow holes
Ballast system is now re ady to be
used.
NO TE: Leave ballast tanks valve in
the ON position, this will e nsure tanks
maximum water capacity while riding.
_______________
63