Filter
Top Products
MAINTENANCE PRO CEDURES
smo2008-001-052_a
TYP ICAL — ALL M O D ELS EXCEPT GTI
1. Fitting
Throttle Cabl e
Throttle Cable Inspection
Depress and release th rottle lever
or fi nger thro ttle. It shou ld opera t e
smoothly and return to i ts initial po-
sition without any hesitation. There
must be a small amount of free-play
when released. Refer to an authorized
Sea-Doo dealer if necessary.
NO TICE
Never attempt to adjust
the idle speed through the th rottle
body tamper proof screw. If so, it
would impair the idl e speed stabil-
ity. Besides, no adjustment could be
performed by the dealer nor the fac-
tory to correc t the idle sp eed. The
throttle b od y would need to be re-
placed at the customer's expense.
Also take into account that might
change the engine emis s ion level
and the engine might not meet the
EPA/CARB requirements.
WARNING
Do no t alter or tam per with throttle
cable adjustment or routing.
WARNING
If thro ttle lever o r f
inger throttle
does not automatically return, do
not o perate watercraft and see
your authorized Se
a-Doo dealer.
smo2008-001-009_b
XPACKAGE
1. Should move freely
2. Slight f ree-play must be present here
smo2008-001-008_b
OTHERS
1. Should move freely
2. Slight f ree-play must be present here
Throttle Cable Lubrication
Lubricate the throttle cabl e with XP-S
Lube o r eq uiva lent.
Fuses
Fuse Remo val/Inspection
If an electrical problem occurs, chec k
the fuses. If a fuse is burnt, replace by
one of the same ra t ing.
Use the fuse remover/installer in-
cluded in the fus e box to ease fuse
removal.
90
______________