Filter
Top Products
GX1256S Page 45
7.8.3 Position Send
The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to
another vessel. Your vessel must have an operating GPS receiver connected
for the QUEST+ to send the position.
NOTE
To transmit a Position Send Call, you must setup the QUEST+ DSC
Individual / Position Call Directory with the name of the vessel(s) or
person and the MMSI of the DSC radio you wish to send your position
to. To setup this directory refer to section 7.7.1 Setting up the Individual
/ Position Call Directory.
7.8.3.1 Transmitting a DSC Position Send Call
1. Press the
[
CALL/SET
(
MENU
)]
key.
2. Press the
[
DOWN
]
key to select the “POS SEND.”
3. Press the
[
CALL/SET
(
MENU
)]
key, then press the
[
UP
]
or
[
DOWN
]
key to select a name in the directory.
4. Press the
[
CALL/SET
(
MENU
)]
key to send your posi-
tion to the selected vessel.
7.8.3.2 Receiving a DSC Position Send Call
When another vessel transmits their vessels location to the QUEST+ the
following will happen:
1. A ringing sound will be produced when the call is received.
2. Press the
[
16/9
]
key to stop ringing
3. The position from the vessel sending it's position will be shown on the
display of the radio and also transferred to any Standard Horizon GPS
Chart plotter if connected.