Filter
Top Products
GX1256SPage 54
sent, the radio will sound a Distress Alarm.
4. The transceiver “shadow-watches” for a transmission
on CH16 or CH70 until an acknowledgment signal is
received. “DISTRESS” and “WAITING” will appear on
the LCD.
5. If an acknowledgement is received, select channel 16
and advise your distress situation.
6. If no acknowledgment is received, the distress call is repeated in 4
minute intervals until an acknowledgment is received.
7. When a DSC Distress acknowledgment is received, a distress alarm
sounds and channel 16 is automatically selected. The LCD shows
the MMSI of the ship responding to your distress.
RECEIVED ACK: acknowledgment signal is received.
RECEIVED RLY: relay signal is received from another vessel or coast
station.
8. To cancel the DSC distress alarm signal from the speaker, press any
key.
9.2 INTERCOM OPERATION
9.2.1 Communication
1. Press and hold the
[
DW
]
key while in the “RADIO” mode, the mode is
changed to “INTERCOM” mode. If the
[
DW
]
key pressed and held again
the QUEST+ will revert to “RADIO” mode.
2. When the “INTERCOM” operation is activated, “IC” is dis-
played on the LCD.
3. Press the PTT switch. The “TALK” is displayed.
NOTE: A warning beep is emitted when the RAM+ Mic
PTT switch is pressed while the transceiver microphone’s
PTT switch is pressed.
4. Speak slowly and clearly into the microphone, hold the
microphone about 1/2 inch away from your mouth.
5. When finished, release the PTT switch.
9.2.2 Calling
Hold down the
[
DW
]
key for 1 second or more, when the “INTERCOM” op-
eration is activated. A calling beep is emitted twice from the transceiver
speaker.